Die-casting and Precision Machining

1.4 STRATEGIES TO IMPROVE DIE CASTING
CAPABILITIES
Several efforts have proven successful in stretching the capabilities
of conventional die casting while preserving short cycle times and
providing dimensional stability and other beneficial characteristics.
In these efforts, three strategies have extended the capabilities
of the al die casting process:
1. eliminating or reducing the amount of entrapped gases,
2. eliminating or reducing the amount of solidification shrinkage,
and zinc die casting
3. altering the microstructure of the metal.
The first two strategies noted affect each of the major quantities
that contribute to porosity as defined in Equation 1.1. The third
strategy addresses the mechanical properties by modifying the
fundamental structure of the die cast machining components
1.5 HIGH INTEGRITY DIE CASTING PROCESSES
Three high integrity die casting  processes have been successfully
developed and deployed for commercial use in high volume production.
These processes are vacuum die casting , squeeze casting,
and semi-solid metalworking (SSM). al die casting

Vacuum die casting utilizes a controlled vacuum to extract
gases from the die cavities and runner system during metal injection.
This process works to minimize the quantities of Entrained and
Lube as defined in Equation 1.3. Porosity due to entrapped gases
is virtually eliminated.al die casting
Squeeze casting is characterized by the use of a large gate area
and planar filling of the metal front within the die cavity. As with
vacuum die casting, this process works to minimize the quantities
of Entrained and Lube as noted in Equation 1.3. The mechanism,
however, is much different. Planar filling allows gases to escape
from the die, as vents remain open throughout metal injection.
Furthermore, the large gate area allows metal intensification pressure
to be maintained throughout solidification, reducing the magnitude
of V* as defined in Equation 1.2. Both porosity from
entrapped gas and solidification shrinkage are reduced by using
squeeze casting.
Semi-solid metalworking is the most complex of the high integrity
die casting processes. During semi-solid metalworking a
partially liquid–partially solid metal mixture is injected into the
die cavity. The fill front is planar, minimizing gas entrapment, as
in squeeze casting. Moreover, solidification shrinkage is greatly
reduced, as a significant portion of the metal injected into the die
cavity is already solid. Semi-solid metalworking addresses both
sides of the porosity relationship defined in Equation 1.1.
In addition to reducing porosity, a unique microstructure is generated
during semi-solid metalworking. The mechanical properties
inherent to this microstructure are superior to those created in
conventionally die cast components.al die casting
Products produced using high integrity die casting processes
have little or no porosity. Moreover, the mechanical properties are
much improved in comparison to conventional die cast components.
This is due to reduced levels of porosity, the viability of
subsequent heat treating, and formation of microstructures not
possible with the conventional zinc die casting process.

al die casting ,zinc die casting ,die casting ,machining components , ikd

1.1 ORIGINS OF HIGH PRESSURE DIE CASTING
Casting processes are among the oldest methods for manufacturing
metal goods. In most early casting processes (many of which
are still used today), the mold or form used must be destroyed in
order to remove the product after solidification. The need for a
permanent mold, which could be used to produce components in
endless quantities, was the obvious alternative.al die casting
In the Middle Ages, craftsmen perfected the use of iron molds
in the machining Components of pewterware. Moreover, the first information
revolution occurred when Johannes Gutenberg developed a
method to manufacture movable type in mass quantities using a
permanent metal mold. Over the centuries, the permanent metal
mold processes continued to evolve. In the late 19th century processes
were developed in which metal was injected into metal dies
under pressure to manufacture print type. These developments culminated
in the creation of the linotype machine by Ottmar Mergenthaler.
However, the use of these casting methods could be
applied to manufacture more than type for the printing press.
H. H. Doehler is credited with developing die casting for the
production of metal components in high volumes. Shown in Figure
1.1 are diagrams filed with patent 973,483 for his first production
die casting machine.1 Initially, only zinc die casting alloys were used
in die casting . Demands for other metals drove the developmentof new die materials and process variants. By 1915, aluminum die casting
alloys were being die cast in large quantities.2 zinc die casting
Much progress has been made in the development of die casting
technologies over the last century. Developments continue to be
made driving the capabilities of the process to new levels and
increasing the integrity of die cast components.

Designing a Robotic Cell for Die Casting
If business requirements drive the die casting cell to be automated, there are many factors that need to be considered
during the design of the cell.
Product and Die Design
The size and shape of the cast product essentially drives the design of the dies used for casting the product.
Shape, size and stroke of the die have a strong impact on the automation in terms of robot reach and accessibility.
In today’s technologically advanced climate, almost all manufacturers have their product and dies designed in 3D
CAD packages.al die casting ,This 3D data is critical for accurate end-effector design as well as design of storage racks or
conveyor pallets. Ensure that this data is at the latest revision and the product used for equipment design is
displayed in the form and shape that it is expected to be in after exiting the die cast machine.
Environmental Factors al die casting
Safety is a major issue in die casting operations due to the extreme heat and emissions that are generated during
the die casting process. Robots are used primarily to avoid humans from being exposed to this dangerous environment.
Most robot OEM’s have a “foundry” series of robots that are designed and manufactured using strong heat
resistant materials which could be used if applicable. End-effector component materials should be selected based
on heat resistance since these parts interact with the high temperature product as it exits the die.zinc die casting
End-effector Design
While the size and shape of the die casting
product is the major factor in the design of the
robotic end-effector, other factors like
temperature, payload, and force requirements
should be taken into account. al die casting
 3D product,fixtures and die models should be used to
design the end-effector to ensure that the
design has appropriate clearances to
surrounding parts within the die. Clamping
surfaces are generally based on quality and
finish requirements and should be carefully
chosen with the customer. End-effector design
should be developed in conjunction with
robotic simulation to ensure that the design is
suitable for all robot tasks and associated
equipment. In cases where removal of gates,
risers and “biscuits” on the product is required,
the end-effector may need to be designed with
the appropriate force compensation or compliance
devices.al die casting

Abstract
This paper identifies key reasons for automating die casting operations, the impact of robots on the automation,
and the advantages of using Product Life Cycle Management (PLM) tools to generate and validate the automation
process.
Introduction
Die casting is a process that has been around for several decades. It is a flexible process for producing metal
parts by forcing molten metal under pressure into reusable steel molds or dies. The dies can be designed to
produce highly accurate and repeatable complex shaped parts.
Die cast products are the bulk of mass-produced items manufactured by the metalworking industry, with applications
in a variety of consumer, commercial and industrial products. Various products ranging from alloy based toys
to automotive engine parts are manufactured using this process. Based on the size of the end product and the
volume requirements, automation of die casting operations can be critical for a successful manufacturing process.
Business Drivers for Die casting Automation
In the last 25 years, there has been a steady increase in the role of industrial robots in manufacturing. With over
15,000 industrial robots sold every year, robots have become a mainstay in the manufacturing industry. Their
flexibility, reliability and repeatability, to name a few advantages, have made them a vital component in the automation
process for die casting applications.
Some of the business drivers for automation of al die casting and zinc die casting operations are:
• Low cost of robots leading to cost effective automation with quick return on investment (ROI).
• Increased requirements for system flexibility to produce multiple parts.
• Ever increasing focus on the human factor/ workcell safety.
• Variety of production rate requirements based on market for cast products.
• Cycle time requirements by station or operation.
• Life cycle of manufactured product to ensure acceptable ROI.
• Product handling requirements.
• Maintenance requirements.
• Safety standards related to heat and gas exposure in casting operations.